Analog Video/audio Fiber extender

Extender consists of a transmitter AF-201AV and a receiver FA-201AV

The analog video input signal is digitized(10bit) pixel for pixel in the transmitter, sent digitally through the fiber cable,
and converted back to analog video in the receiver.
The analog audio signals are digitized(20bit) in the transmitter, sent through the fiber cable,
and converted back to analog audio in the receiver.

The AF-201AV transmitter is class 1 laser product.

AF-201AV provides a built-in color bars and embedded 2 channel audio signal(1KHz and 2KHz) test generator standard SMPTE-259M.
FA-201AV provides a built-in color bars and embedded 2 channel audio signal(1KHz and 2KHz) test generator

Optical

Optical fiber interconnection between transmitter and receiver -1 singlemode (SM) cabl, SC connector
Wavelength: 1310 nm(1550nm)
Operating distance 10 km with single mode (SM) cables with a FA-201AV,AF-201AV

NOTE- Operating distance is approximate.

Transmission power -7 dBm, typical
Maximum receiver sensitivity -18 dBm, typical

Video

Standards:
Input PAL, SECAM, autodetected
Output PAL (follows vertical rate)
Decoder type Adaptive 2D, digital comb filter

Video input — transmitter:
Number/signal type - component (Y, Pr, Pb), S-video, composite video
connectors 1 x 3 BNC Nominal level -1.0 Vp-p for Y of component video and S-video, and for composite video
0,525 Vp-p for Pr, Pb of component video
0.3 Vp-p for C of S-video
Impedance 75 ohm
Input coupling AC

Video output — receiver:
Number/signal type 1 component (Y, Pr, Pb) video, S-video, composite video
Connectors 1 x 3 BNC Nominal level -1.0 Vp-p for Y of component video and S-video, and for composite video
0,525 Vp-p for Pr, Pb of component video
0.3 Vp-p for C of S-video

Audio
Frequency response 20 Hz to 20 kHz, ±0.5 dB
Audio bits per sample 20 bits per channel, 2 channels (L, R)
Sampling rate 48 kHz

Audio input — transmitter
Number/signal type: 1 stereo, balanced or 2 mono, unbalanced.
Connectors: 5 mm screw connector, 3 pole
Impedance: 100Kohms balanced, DC coupled
Nominal level: +4 dBu (1.23 Vrms)

NOTE: 0 dBu = 0.775 Vrms

Audio output — receiver
Number/signal type: 1 stereo, balanced or 2 mono unbalanced.
Connectors 5 mm screw connector, 3 pole
Nominal level +4 dBu (47Kohm),

Power input requirements 12V DC, 1 A

Enclosure type - metal (aluminium )

Dimensions: 40mm x 110mm x 150mm