|
Converter HD SDI to HDMI
The converter is designed for using in pro- and consumer TV-complex configurations. It provides real time HD/SD SDI (SMPTE 292M) to HDMI conversion.
The HD SDI to HDMI converter can be used for importing content from HD-SDI camcorders, videomixers, switchers and other video sources to HDMI devices such as monitors, encoders, projector etc. This device is very suitable for professionals who need to interface professional HD SDI equipment to low cost HDMI devices.
Applications:
• Monitoring HD SDI signals on low cost HDMI monitors
• Electronic news gathering
• Sports broadcasting
Features:
• Converts HD-SDI to HDMI in real time including embedded audio without delay
• Supports SD-SDI SMPTE259M 720x 576/50i(PAL), 720x480/59.94i(NTSC), HD-SDI SMPTE292M
1920x1080/50i, 1920x1080/59.94i, 1280x720/59.94p
• Options 3G HD-SDI SMPTE424M 1920x1080/50p, 1920x1080/59.94p
• Embedded Audio (up to 16 Channels)
• Status LED's
Specifications:
Video Input
SD-SDI SMPTE259M 720x 576/50i(PAL), 720x480/59.94i(NTSC)
HD-SDI SMPTE292M 1920x1080/50i, 1920x1080/59.94i, 1280x720/59.94p, 3G HD-SDI SMPTE424M
1920x1080/50p, 1920x1080/59.94p
Audio Input
SDI-ANC SMPTE291M, SDI-AUD SMPTE272M Linear PCM, 20bit/48kHz, 16ch
Video Output
HDMI 1.3, EEDID
1920x1080/50p, 1920x1080/59.94p, 1920x1080/50i, 1920x1080/59.94i, 1280x720/59.94p, 720x576/50i,
720x480/59.94i
Audio Output
HDMI 1.3, EEDID Linear PCM, 24bit/48kHz, up to 16ch
Control
USB 2.0
Vendor commands
Software and driver for Windows
DIP Switch + LEDs
Manual mode selection/indication
Connectors
HDMI TYPE A (19 pin) x 1
SDI BNC x 1
USB SMALL USB ON THE GO (5 pin) x 1
POWER DC JACK 5.5mm x 1
Upgrading
FPGA and firmware upgrade via USB
Options
Internal Test Signal Generator
Automatic switch to Black or Test Signal on absence of input signal
Power Supply: 7-25VDC, 0,5A max, from DC Jack
Dimensions: (H x W x D): 110 x 60 x 25mm
Weight: 0,12kg
NOTE: Device use direct conversion with embedded audio.
Output mode equal input mode.
No scaling or frame rate conversion supported.
|
